QueueMarkerEvent
soln=BASFLO /cmd=DocCreated
soln=BASFLO /cmd=DocOpened
v14:Validation
<v14:Validation><v14:ValidationProperties ShowIgnored='0'/><v14:RuleSets><v14:RuleSet ID='1' NameU='Flowchart' Description='Verify that Flowchart shapes are connected properly.'><v14:Rule ID='1' NameU='UngluedConnector' Category='Connectivity' Description='Connector is not glued at both ends.'><v14:RuleFilter>ROLE()=1</v14:RuleFilter><v14:RuleTest>AND(AGGCOUNT(GLUEDSHAPES(4)) = 1, AGGCOUNT(GLUEDSHAPES(5)) = 1)</v14:RuleTest></v14:Rule><v14:Rule ID='2' NameU='StartWithoutTerminator' Category='Start / End' Description='Flowchart shape has no incoming connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(1)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='3' NameU='EndWithoutTerminator' Category='Start / End' Description='Flowchart shape has no outgoing connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='4' NameU='NoStartTerminator' Category='Start / End' Description='Flowchart does not start with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(2))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='5' NameU='NoEndTerminator' Category='Start / End' Description='Flowchart does not end with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(1))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='6' NameU='UnconnectedShape' Category='Connectivity' Description='Flowchart shape is not connected to any other shape.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(CONNECTEDSHAPES(0)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='7' NameU='TerminatorInMiddle' Category='Connectivity' Description='Start/End shape has both incoming and outgoing connectors.'><v14:RuleFilter>OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))</v14:RuleFilter><v14:RuleTest>NOT(AND(AGGCOUNT(CONNECTEDSHAPES(1))&gt;0,AGGCOUNT(CONNECTEDSHAPES(2))&gt;0))</v14:RuleTest></v14:Rule><v14:Rule ID='8' NameU='TooFewOutConns' Category='Connectivity' Description='Decision shape should have more than one outgoing connector.'><v14:RuleFilter>OR(HASCATEGORY("Decision"),STRSAME(LEFT(MASTERNAME(750),8),"Decision"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 1</v14:RuleTest></v14:Rule><v14:Rule ID='9' NameU='NonFlowchartShape' Category='Connectivity' Description='Connected shape is not recognized as a Flowchart shape.'><v14:RuleFilter>NOT(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(0)) = 0</v14:RuleTest></v14:Rule><v14:Rule ID='10' NameU='NoShapeText' Category='Text' Description='Flowchart shape has no text label.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>NOT(STRSAME(SHAPETEXT(TheText), ""))</v14:RuleTest></v14:Rule><v14:Rule ID='11' NameU='OutsideCFF' Category='Cross - Functional' Description='Flowchart shapes should belong to a Swimlane.' RuleTarget='1'><v14:RuleFilter
>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"HASCATEGORY(""Swimlane"")"))&gt;0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"AND(OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart"")),AGGCOUNT(FILTERSET(PARENTCONTAINERS(),""HASCATEGORY(""""Swimlane"""")""))=0)"))=0</v14:RuleTest></v14:Rule></v14:RuleSet></v14:RuleSets></v14:Validation>
xmlns:v14
http://schemas.microsoft.com/office/visio/2010/extension
Process,function,task,Basic,Flowchart,flow,data,process,joiner,association,business,process,Six,6,Sigma,ISO,9000
Drag the shape onto the drawing page.
Universal,connector,line,arrowhead,arrow,route,connect,connection,association,conjunction,join
Drag onto the page, then drag the ends to blue x
s on shapes (red indicates connection).
able right-angled line.
Reposition Bend
rounded,rectangle,box,basic
ounding.
ers on rectangle.
Adjust Corner Rounding
WAN,network,spanning,large,geographical,areas,usually,slower,interconnections,local,area,LAN,Basic,3D,workgroups,configuration,WANs,LANs,networked,information
A network spanning large geographical areas, usually with slower interconnections than a local area network (LAN).
Connect To Network Device
1
2
3
4
5
6
7
Mini,computer,Adds,minicomputer,server,tower,network,diagram,Basic,3D,workgroups,configuration,WANs,LANs,networked,information
Adds a minicomputer or server tower to your network diagram.
perty information.
Reposition Text
Black and White
PBX,comm,hub,Adds,public,switch,telecommunication,network,diagram,Basic,3D,workgroups,configuration,WANs,LANs,networked,information
Adds a public switch or a telecommunication hub to your network diagram.
property information.
Personal,computer,non,manufacturer,specific,desktop,Basic,Network,3D,workgroups,configuration,WANs,LANs,networked,information
A non-manufacturer-specific personal desktop computer.
ormation.
Server,Adds,network,diagram,Basic,3D,workgroups,configuration,WANs,LANs,networked,information
Adds a network server to your network diagram.
er property information.
nformation.
This connector automatically routes between the shapes it connects.
Brainstorm,legend,icon,Done
Drag to the connection point of another shape to glue them together.
Subprocess,predefined,process,subroutine,module,basic,flowchart,information,flow,data,process,joiner,association,business,process,Six,6,Sigma,ISO,9000
Drag onto the page to add a subprocess or a predefined process.
Move Line
C:\Program Files\Microsoft Office\Visio11\1033\BASFLO_U.VSS
Arial Unicode MS
Symbol
Wingdings
Calibri
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
Arial
Malgun Gothic
Times New Roman
MS Farsi
Guide
TheDoc
Gesture Format
Process
msvThemeColors
Cost
msvThemeEffects
ProcessNumber
msvThemeOrder
msvNoAutoConnect
Flow Normal
Connector
Owner
Function
StartDate
EndDate
Status
Row_1
SetDefaultSize
ResizeWithText
visVersion
DefaultWidth
DefaultHeight
ResizeTxtHeight
Process.3
Process.5
Universal connector
Row_2
Row_3
Universal connector.8
Universal connector.9
Process.10
Process.11
Process.12
Universal connector.13
Universal connector.14
Universal connector.15
Process.2
Universal connector.17
Basic
Net Normal
3D Net Face
3D Net Shadow
3D Net Highlight
3D Net Hole
3D Net Dark Shadow
3D Net LED
Net Text
Subprocess
3D Net Screen
Calendar Normal
Rounded rectangle
WAN.17
Row_4
Row_5
Row_6
Row_7
Row_8
Manufacturer
ProductNumber
PartNumber
ProductDescription
AssetNumber
SerialNumber
Location
Building
Room
Department
Mini computer.18
FillPattern
FillForegnd
FillBkgnd
PBX / comm. hub.19
Personal computer.20
Server.21
Dynamic connector
Done
visLegendShape
visLocToPar
AntiScale